Increase your apparent magnification by reducing your hole size. Select an aperture size that will fit tightly around the scope housing when looking through the peep at the scope while at full draw.

If you are using too large of an aperture, accuracy may suffer due to improper alignment of the scope and peep.

If you are using too small an aperture, you may lose some field of view of the scope lens and restrict the amount of light, making for a dim sight picture.

• CST – Center String Technology – Podium Peep™ Target ™ Aperture located on center of bowstring – no L and R misses.
• TAP – Tool-less Aperture Technology – Knurled Tool-less Podium Peep™ Target ™  Aperture – eliminates the need for an aperture wrench.
• If you use a 1 3/8”, or Versa² scope, try the 1/32”, 3/64”, or 1/16” Aperture.
• If you use a 1 5/8” or the Versa² scope, try the 3/64”, 1/16”, or 3/32” Aperture.
• If you use the Super D or Versa³ try the 3/32”, 1/8”, 5/32″ or 1/4″ Apertures.
  
  NOTE: for larger scopes you may also want to consider one of the PXL Hunter or Large Peep Housings.
  Podium Peep™ Apertures, Podium Peep™ Clarifiers, and Podium Peep™ Verifiers fit into Specialty Archery Podium Peep™ ONLY.
• NOT compatible with other Specialty Archery peeps.
  
  CAUTION: High powered bows create a great amount of vibration.  This may loosen Verifiers, Clarifiers and Apertures over time.  Tighten your Apertures before each use.  If you hear a buzzing sound, this indicates a loose Aperture.  You may use a drop of Vibra-Tite VC 3 (#VC3), Teflon tape, bow wax, or any other non-permanent binding agent on the threads.