Werner Beiter GmbH & Co. KG D - 78083 - Dauchingen GERMANY
LOCK-SYSTEM Vers. 04/2020
The Beiter Lock-System ist a Quick Disconnect for Stabilisers with a positive Lock. Less than TWO Turns and your stabilizers are fixed on the bow or its accessories.
What do I need?
To use the Beiter Lock System you need a Beiter Lock Adapter as well as a Conical Adapter, which is needed to make the thread long enough to ensure the correct fit and give the center holding nut the axial fixation. Adapter, Thread and Nut together are the strength of the Beiter Lock System.
If you decide to use the Beiter Lock V-Bar, than the Adapters are not needed, as these are integrated in the system: you have just to choose the correct diameter according to the stabilizer. We offer a 19mm or 22mm adapter. If you are using a Beiter Centralizer, you can convert it to the Beiter Lock System by simply exchange the Bowadapter witht the Adapter BLCE88105SW21. If you already have a 28mm long adapter, you just need the Adapter Plate 28-21mm (BLADCE27) .
BLAD51612SW Beiter-Lock, Adapter 5/16"-24 x 12mm
BLAD51627SW Beiter-Lock, Adapter 5/16"-24 x 27mm, for V-Bar